Categories
Contact Us

Add: Lingzi Town, Zichuan District, Zibo City, Shandong Province, China
Tel: +86-533-8172458
Fax: +86-533-5589996
E-mail: felixsu@zbtashan.cn
Mobile: +86-15864480918

Knowledge
Home > Knowledge > Content
Specification for quality of ceramic fibreboard
Feb 09, 2018

1. Aluminum silicate masonry end, stop a semblance of finishing, uneven place, must use the press plate to play flat, large gap must be cut ceramic fibreboard brick trimming, so that the appearance of flat close.

2. Ceramic fibreboard brick lining thickness must fit the request.

3. Thickness measurement length, width, according to the diagram position marked nine points, the needle thickness of the disc quietly flat on the specimen, so that the disc hole alignment measurement points, and the needle pointed downward, carefully inserted into the disc hole, when the needle contact with the sample, light pressure cursor, so that the needle through the sample to touch the glass and read the thickness.

4. The Al2O3 content of ceramic fiberboard brick is not less than 45%.

5. Ceramic Fiberboard tile should stop before the test row, the separation layer should be sticky, gap staggered.


  • Newsletter
  • Categories
  • Contact Us

    Add: Lingzi Town, Zichuan District, Zibo City, Shandong Province, China
    Tel: +86-533-8172458
    Fax: +86-533-5589996
    E-mail: felixsu@zbtashan.cn
    Mobile: +86-15864480918

  • QR Code
  • Copyright © Zibo Tashan Refractory Material Co.,Ltd All Rights Reserved.